Installation Instructions For For Scratch n All® Pad
Each 11 oz., 5” x 6” x 1” pad comes with four rust-proof, stainless steel mounting screws and nylon washers to firmly and safely attach the pads to nearly any solid surface. The folding V-notch on the rear of the pad also acts as a channel that prevents moisture from collecting under the Scratch n All® in flat applications which helps protect the mounting surfaces from water damage.
Includes:
- 1 x Scratch n All® pad
- 4 x Stainless steel wood screws
- 4 x nylon washers
Flat Surface Installation
- Place Scratch n All® pad in desired position on flat surface and secure with 4 screws and washers as shown.
Corner Installation
- Fold Scratch n All® pad to create 90º angle.
- Secure pad to corner with 4 screws and washers as shown.
Add Pads
To add pads, overlap interlocking sides and overlap notched edges. For best results on flat surface, start in lower left corner and work upward and to the left.
For best results on corners, start at the lowest position and work upward.
Hint:
To predrill holes, place pad in desired position and use the pad as template to mark the hole positions.
Print Instructions
(opens a pdf file in a new window)
